Coarse Thread Screws, Csk Rib, Star Drive, T17 Tip

Stainless Coarse Thread Screws Star Dr T17 Tip

Stainless Coarse Thread Screws Star Dr T17 Tip

The advantages of these decking screws are:

  • Flush finish.
  • Heads look uniform across screws, unlike Square Drive heads which need to be lined up to achieve a uniform look.

Applications: Commonly used for both soft and hardwood wide board decking up to 30mm thick.

 
SSTCKCPRG10051T
In Stock
stainless steel countersunk 6 lobe particle board screw
BPIR (click to view)
Your cart has been updated.

10G X 50 304 Rib CSK Star Particle Board Screw T17

SSTCKCPRG10051T
In Stock
BPIR (click to view)
stainless steel countersunk 6 lobe particle board screw
Your cart has been updated.
In Stock
BPIR (click to view)

Anzor Building
Product Information Sheet

{this.state.description}

Product Disclosure Information Self-Assessment
Version:
Product name-
Product line-
Product identifier-
Product description.
-
Relevant building code clauses
-
Contributions to compliance
-
Scope of use
-
Conditions of use
Items should be used as specified by a qualified engineer.
Contact details
Manufacture location-
Legal and trading name of manufacturer-
Legal and trading name of importerAnzor Fasteners Ltd
Importer address for service93 Apollo Drive, Rosedale
Auckland 0632
Importer websitewww.anzor.co.nz
Importer NZBN9429038848490
Importer emailsales@anzor.co.nz
Importer phone number09 476 0001
Warnings and bans
Is the building product/building product line subject to warning or ban under section 26 of the Building Act 2004?
No

Appendix
BPIR Selections
-
Building code performance clauses
All relevant building code performance clauses listed in this document:
-

Build your deck faster with Coarse Thread Screws, Csk Rib, 6 Lobe Drive, T17 Tip.

Advantages
  • Meets BPIR regulation
  • 316 stainless
  • Flush finish.
  • Star Drive allows for greater torque.
  • Heads look uniform across screws, unlike Square Drive heads which need to be lined up to achieve a uniform look.
Applications and Approval

Applications

  • Commonly used for both hardwood and softwood decking.
  • Tips for use:
  • Use 10g Quick Cut for counter sinking/drilling pilot hole.
  • T25 High Torque tip to drive screw.
  • Pre-drilling may be required and recommended for hardwood and board ends.

Note: Screw length depends on the thickness and type of the material you’re working with. Consult a Licensed Building Practitioner (LBP) to determine the best screw length for your application.

NB: These guidelines should be read in conjunction with the New Zealand Building Code (NZS3602, NZS3604, NZS3605, NZS3640 and NZS4203).

Downloads

Stainless Coarse Thread Screws Star Dr T17 Tip

Stainless Coarse Thread Screws Star Dr T17 Tip

The advantages of these decking screws are:

  • Flush finish.
  • Heads look uniform across screws, unlike Square Drive heads which need to be lined up to achieve a uniform look.

Applications: Commonly used for both soft and hardwood wide board decking up to 30mm thick.

 

Coarse Thread Screws, Csk Rib, Star Drive, T17 Tip

SSTCKCPRG10051T
In Stock
stainless steel countersunk 6 lobe particle board screw
BPIR (click to view)
Your cart has been updated.

10G X 50 304 Rib CSK Star Particle Board Screw T17

SSTCKCPRG10051T
In Stock
BPIR (click to view)
stainless steel countersunk 6 lobe particle board screw
Your cart has been updated.
In Stock
BPIR (click to view)

Anzor Building
Product Information Sheet

{this.state.description}

Product Disclosure Information Self-Assessment
Version:
Product name-
Product line-
Product identifier-
Product description.
-
Relevant building code clauses
-
Contributions to compliance
-
Scope of use
-
Conditions of use
Items should be used as specified by a qualified engineer.
Contact details
Manufacture location-
Legal and trading name of manufacturer-
Legal and trading name of importerAnzor Fasteners Ltd
Importer address for service93 Apollo Drive, Rosedale
Auckland 0632
Importer websitewww.anzor.co.nz
Importer NZBN9429038848490
Importer emailsales@anzor.co.nz
Importer phone number09 476 0001
Warnings and bans
Is the building product/building product line subject to warning or ban under section 26 of the Building Act 2004?
No

Appendix
BPIR Selections
-
Building code performance clauses
All relevant building code performance clauses listed in this document:
-

Build your deck faster with Coarse Thread Screws, Csk Rib, 6 Lobe Drive, T17 Tip.

Advantages
  • Meets BPIR regulation
  • 316 stainless
  • Flush finish.
  • Star Drive allows for greater torque.
  • Heads look uniform across screws, unlike Square Drive heads which need to be lined up to achieve a uniform look.
Applications and Approval

Applications

  • Commonly used for both hardwood and softwood decking.
  • Tips for use:
  • Use 10g Quick Cut for counter sinking/drilling pilot hole.
  • T25 High Torque tip to drive screw.
  • Pre-drilling may be required and recommended for hardwood and board ends.

Note: Screw length depends on the thickness and type of the material you’re working with. Consult a Licensed Building Practitioner (LBP) to determine the best screw length for your application.

NB: These guidelines should be read in conjunction with the New Zealand Building Code (NZS3602, NZS3604, NZS3605, NZS3640 and NZS4203).

Downloads

Learn Something New

To receive useful info and product updates add your details below

You are subscribed to push notifications but they are not enabled in your browser.
Please either enable push notifications here or unsubscribe here.