|
M10 Type A Lindapter Medium Girder Clamp HDG
LDA10MHDG
In Stock
|
|
The Type A girder clamp is used to achieve a fast steelwork fixing connection between two steel beams and is often used in a pair with Type B clamps. It has a recessed top to hold the bolt head captive while the nut and washer are tightened down using only one tool. The skirt on the underside of the clamp abuts the edge of the beam flange and prevents the clamp rotating during installation. Type A girder clamps can also be used on their own if one piece of the steelwork has been pre-drilled.
Tail Lengths & Packing Pieces
The clamp is available in three tail lengths, Short, Medium and Long and can be used with Lindapter packing pieces to increase the clamping range. Choose the correct combination of tail length and packing pieces to suit a specific flange thickness. Download datasheet for selection table.
Location & End Plates
These plates ensure the clamps and bolts are located in the correct position relative to the supporting steelwork. Location plates are simple fabricated items designed to sit between the two sections to be clamped together to ensure the bolts are fixed at the correct centres. End plates are simple fabricated items that are pre-welded to support frames, bracket or sections, allowing connection to the supporting structure with standard Lindapter clamps. Download datasheet for further information.
Build safe and secure steel connection with Lindapter’s Girder Clamp Configurator, click here to visit Lindapter.
Durability and corrosion protection:
| Corrosivity Class | Galvanised Steel | Electroplated Steel |
|---|---|---|
| C1 | More than 50 years | More than 20 years |
| C2 | More than 50 years | More than 5 years |
| C3 | More than 20 years | Not Suitable |
|
M10 Type A Lindapter Medium Girder Clamp HDG
LDA10MHDG
In Stock
|
|
The Type A girder clamp is used to achieve a fast steelwork fixing connection between two steel beams and is often used in a pair with Type B clamps. It has a recessed top to hold the bolt head captive while the nut and washer are tightened down using only one tool. The skirt on the underside of the clamp abuts the edge of the beam flange and prevents the clamp rotating during installation. Type A girder clamps can also be used on their own if one piece of the steelwork has been pre-drilled.
Tail Lengths & Packing Pieces
The clamp is available in three tail lengths, Short, Medium and Long and can be used with Lindapter packing pieces to increase the clamping range. Choose the correct combination of tail length and packing pieces to suit a specific flange thickness. Download datasheet for selection table.
Location & End Plates
These plates ensure the clamps and bolts are located in the correct position relative to the supporting steelwork. Location plates are simple fabricated items designed to sit between the two sections to be clamped together to ensure the bolts are fixed at the correct centres. End plates are simple fabricated items that are pre-welded to support frames, bracket or sections, allowing connection to the supporting structure with standard Lindapter clamps. Download datasheet for further information.
Build safe and secure steel connection with Lindapter’s Girder Clamp Configurator, click here to visit Lindapter.
Durability and corrosion protection:
| Corrosivity Class | Galvanised Steel | Electroplated Steel |
|---|---|---|
| C1 | More than 50 years | More than 20 years |
| C2 | More than 50 years | More than 5 years |
| C3 | More than 20 years | Not Suitable |
Anzor's 2025 Holiday Opening Hours
Lindapter Girder Clamps: Safe and Secure Connections
Lindapter Hollo-Bolt™: Safe and Secure Connections
To receive useful info and product updates add your details below
Request a copy of our Engineering & Marine, or Construction Wall Chart.
Click here to download a PDF of our Engineering Catalogue. This catalogue includes stainless fasteners and fittings, marine hardware and construction brackets.
Click here to download a PDF of our Construction Catalogue. This catalogue includes stainless/galvanized fasteners and fittings, and construction brackets.
