The sizes are denoted by the metric thread followed by the length (thickness range). This length must match the thickness of the sheet metal you are using. The length is also often referred to as the draw or grip thickness.
Code: NSSF..
304 SS
| Size Int. Thread (Grip Range) | Hole (+0.1/-0mm) | A (Max. mm) | B (+0.3/-0mm) | C (+0/-0.5mm) | D (+0.1/-0.1mm) |
|---|---|---|---|---|---|
| M4 (0.3-2.5) | 6.0 | 6.0 | 11.0 | 9.0 | 1.0 |
| M4 (2.5-4.0) | 6.0 | 6.0 | 12.5 | 9.0 | 1.0 |
| M5 (0.3-3.0) | 7.0 | 7.0 | 12.0 | 10.0 | 1.0 |
| M5 (3.0-4.5) | 7.0 | 7.0 | 13.5 | 10.0 | 1.0 |
| M6 (0.5-3.0) | 9.0 | 9.0 | 14.0 | 12.0 | 1.5 |
| M6 (3.0-5.0) | 9.0 | 9.0 | 16.0 | 12.0 | 1.5 |
| M8 (0.5-3.0) | 11.0 | 11.0 | 16.0 | 15.0 | 1.5 |
| M8 (3.0-5.5) | 11.0 | 11.0 | 18.5 | 15.0 | 1.5 |
| M10 (1.0-3.5) | 13.0 | 13.0 | 19.0 | 17.0 | 2.0 |
| M10 (3.5-6.0) | 13.0 | 13.0 | 21.5 | 17.0 | 2.0 |
If measurements are critical, please ask for them to be checked. Dimensions last updated 09/21.
Code: NSAF..
ALI
| Size Int. Thread (Grip Range) | Hex Hole (±0.1/-0mm) | A (+0/-0.1mm) | B (+0.3/-0.3mm) | C (+0.3/-0.3mm) | D (+0.1/-0.1mm) |
|---|---|---|---|---|---|
| M4 (0.8∼2.5mm) | 6.0 | 6.0 | 10.5 | 9.0 | 0.8 |
| M4 (2.5∼3.5mm) | 6.0 | 6.0 | 11.5 | 9.0 | 0.8 |
| M5 (0.8∼2.5mm) | 7.0 | 7.0 | 11.5 | 10.0 | 1.0 |
| M5 (2.5∼3.5mm) | 7.0 | 7.0 | 12.5 | 10.0 | 1.0 |
| M6 (1.0∼2.5mm) | 9.0 | 9.0 | 13.5 | 12.5 | 1.5 |
| M6 (2.5∼4.0mm) | 9.0 | 9.0 | 15.0 | 12.5 | 1.5 |
| M8 (2.5∼4.0mm) | 11.0 | 11.0 | 15.0 | 14.5 | 1.5 |
| M10 (2.5∼4.0mm) | 13.0 | 13.0 | 17.0 | 16.5 | 1.5 |
If measurements are critical, please ask for them to be checked. Dimensions last updated 09/21.
Code: NSSR..
304 SS
| Size Int. Thread (Grip Range) | Hole (+0.1/-0mm) | A (Max. mm) | B (+0.3/-0mm) | C (+0/-0.5mm) | D (+0.1/-0.1mm) |
|---|---|---|---|---|---|
| M3 (0.5-2.0mm) | 5.0 | 5.0 | 9.0 | 6.0 | 0.5 |
| M4 (0.5-3.0mm) | 6.0 | 6.0 | 11.0 | 7.0 | 0.5 |
| M5 (0.5-3.0mm) | 7.0 | 7.0 | 12.0 | 8.0 | 0.5 |
| M6 (0.8-3.0mm) | 9.0 | 9.0 | 14.0 | 10.0 | 0.5 |
| M8 (1.0-3.0mm) | 11.0 | 11.0 | 16.0 | 12.0 | 0.5 |
| M10 (1.0-3.5mm) | 13.0 | 13.0 | 19.0 | 14.2 | 0.8 |
If measurements are critical, please ask for them to be checked. Dimensions last updated 09/21.
Code: NSAR..
ALI
| Size Int. Thread (Grip Range) | Hex Hole (±0.1/-0mm) | A (+0/-0.1mm) | B (+0.3/-0.3mm) | C (+0.3/-0.3mm) | D (+0.1/-0.1mm) |
|---|---|---|---|---|---|
| M3 (0.8∼1.5mm) | 5.0 | 5.0 | 9.0 | 6.00 | 0.5 |
| M4 (2.5∼3.5mm) | 6.0 | 6.0 | 12.0 | 7.0 | 0.5 |
| M5 (2.5∼3.5mm) | 7.0 | 7.0 | 13.0 | 8.0 | 0.5 |
| M6 (2.5∼4.0mm) | 9.0 | 9.0 | 15.5 | 10.0 | 0.5 |
| M8 (2.5∼4.0mm) | 11.0 | 11.0 | 17.0 | 12.00 | 0.7 |
If measurements are critical, please ask for them to be checked. Dimensions last updated 09/21.
Code: NSSRM..LS
304 SS
| Size Int. Thread (Grip Range) | A (Max.) | B (+0.5/-0) | C (±0.3) | D (+0.3/-0) | Hole +0.1/-0 |
|---|---|---|---|---|---|
| M5 x 0.8 (0.5-3.0mm) | 7.00 | 7.00 | 12.00 | 8.00 | 0.50 |
| M6 x 1.0 (0.5-3.0mm) | 9.00 | 9.00 | 14.00 | 10.00 | 0.50 |
| M8 x 1.25 (0.5-3.0mm) | 11.00 | 11.00 | 16.00 | 12.00 | 0.50 |
| M8 x 1.25 (3.0-5.5mm) | 11.00 | 11.00 | 18.50 | 12.00 | 0.50 |
| M10 x 1.5 (1.0-3.5mm) | 13.00 | 13.00 | 19.00 | 14.20 | 0.80 |
If measurements are critical, please ask for them to be checked. Dimensions last updated 09/21.
Code: NSSFS..SL
304 SS
| Size Int. Thread (Grip Range) | A (Max.) | B (+0.5/-0) | C (±0.3) | D (+0.3/-0) | Hole +0.1/-0 |
|---|---|---|---|---|---|
| M5 x 0.8 (3.0-4.5mm) | 7.0 | 7.00 | 13.50 | 1.00 | 7.00 |
| M8 x 1.25 (3.0-5.5mm) | 11.00 | 11.00 | 18.50 | 1.50 | 11.00 |
| M10 x 1.5 (3.5-6.0mm) | 13.00 | 13.00 | 21.50 | 2.00 | 13.00 |
If measurements are critical, please ask for them to be checked. Dimensions last updated 09/21.
Code: NSSFS..SL
304 SS
| Size Int. Thread (Grip Range) | D (± 0.1) | H (±0/-0.5) | P (±0.1) | L (±0.3) | Hole +0.1/-0 |
|---|---|---|---|---|---|
| M6 (3.0-5.0mm) | 8.9 | 12.00 | 1.5 | 23.00 | 9.0 |
| M8 (3.0-5.5mm) | 10.90 | 15.00 | 1.50 | 26.00 | 11.0 |
| M10 (3.0-5.5mm) | 12.90 | 17.00 | 2.00 | 29.00 | 13.0 |
If measurements are critical, please ask for them to be checked. Dimensions last updated 09/21.
Code: NSSHFM..
304 SS
| Size Int. Thread (Grip Range) | SW (+0/-0.15) | Hex Hole (SW1) | SE (Min.) | d2 (+0.5/-0) | K (±0.1) | L (±0.3) |
|---|---|---|---|---|---|---|
| M4 (0.5 ∼ 2.5mm) | 6.00 | 6.10 | 6.80 | 9.00 | 1.00 | 11.00 |
| M4 (2.5 ∼ 4.0mm) | 6.00 | 6.10 | 6.80 | 9.00 | 1.00 | 12.50 |
| M5 (0.5 ∼ 3.0mm) | 7.00 | 7.10 | 7.90 | 10.00 | 1.00 | 12.00 |
| M5 (3.0 ∼ 4.5mm) | 7.00 | 7.10 | 7.90 | 10.00 | 1.00 | 13.50 |
| M6 (0.5 ∼ 3.0mm) | 9.00 | 9.10 | 10.20 | 12.00 | 1.50 | 14.00 |
| M6 (3.0 ∼ 5.0mm) | 9.00 | 9.10 | 10.20 | 12.00 | 1.50 | 16.00 |
| M8 (0.5 ∼ 3.0mm) | 11.00 | 11.10 | 12.40 | 14.50 | 1.50 | 16.00 |
| M8 (3.0 ∼ 5.0mm) | 11.00 | 11.10 | 12.40 | 14.50 | 1.50 | 18.50 |
| M10 (1.0 ∼ 3.5mm) | 13.00 | 13.10 | 14.70 | 16.50 | 2.00 | 19.00 |
If measurements are critical, please ask for them to be checked. Dimensions last updated 09/21.
Code: NSSHRM..
304 SS
| Size Int. Thread (Grip Range) | SW (+0/-0.15mm) | Hex Hole (SW1) | SE (Min.) | D (±0.3) | K (+0.3/-0mm) | L (+0.5/-0) |
|---|---|---|---|---|---|---|
| M3 (0.5∼2.0mm) | 5.0 | 5.10 | 5.50 | 6.00 | 0.5 | 9.0 |
| M4 (0.5∼2.5mm) | 6.0 | 6.1 | 6.80 | 7.0 | 0.5 | 11.00 |
| M4 (2.5∼4.0mm) | 6.0 | 6.10 | 6.80 | 7.0 | 0.5 | 12.50 |
| M5 (0.5∼3.0mm) | 7.0 | 7.10 | 7.90 | 8.00 | 0.5 | 12.00 |
| M5 (3.0∼4.5mm) | 7.00 | 7.10 | 7.90 | 8.00 | 0.5 | 13.50 |
| M6 (0.5∼3.0mm) | 9.00 | 9.10 | 10.20 | 10.00 | 0.5 | 14.00 |
| M8 (0.5∼3.0mm) | 11.00 | 11.10 | 12.40 | 12.00 | 0.5 | 16.00 |
| M8 (3.0∼5.0mm) | 11.00 | 11.10 | 12.40 | 12.00 | 0.5 | 18.50 |
| M10 (1.0∼3.5mm) | 13.00 | 13.10 | 14.70 | 14.20 | 0.7 | 19.00 |
If measurements are critical, please ask for them to be checked. Dimensions last updated 09/21.
Code: NSSFS..
304 SS
| Size Int. Thread (Grip Range) | D (± 0.1) | H (±0/-0.5) | P (±0.1) | L (±0.3) | Hole +0.7/-0 |
|---|---|---|---|---|---|
| M4 (0.5-2.5mm) | 5.90 | 9.00 | 1.00 | 16.00 | 6.0 |
| M5 (0.5-3.0mm) | 6.90 | 10.00 | 1.00 | 18.00 | 7.0 |
| M5 (6.0-7.5mm) | 6.90 | 10.00 | 1.00 | 22.50 | 7.0 |
| M6 (0.5-3.0mm) | 8.90 | 12.00 | 1.50 | 21.00 | 9.0 |
| M6 (3.0-5.0mm) | 8.90 | 12.00 | 1.50 | 23.00 | 9.0 |
| M8 (0.5-3.0mm) | 10.90 | 15.00 | 1.50 | 23.50 | 11.0 |
| M10 (1.0-3.5mm) | 12.90 | 17.00 | 2.00 | 26.50 | 13.0 |
If measurements are critical, please ask for them to be checked. Dimensions last updated 09/21.
Code: NSSRS..
304 SS
| Size Int. Thread (Grip Range) | D (± 0.1) | H (±0.3) | P (+0.3/-0) | L (+0.5/-0) | Hole +0.1/-0 |
|---|---|---|---|---|---|
| M4 (0.5-2.5mm) | 5.90 | 7.00 | 0.5 | 16.00 | 6.0 |
| M5 (0.5-3.0mm) | 6.90 | 8.00 | 0.5 | 18.00 | 7.0 |
| M6 (0.5-3.0mm) | 8.90 | 10.00 | 0.50 | 21.00 | 9.0 |
| M8 (0.5-3.0mm) | 10.90 | 12.00 | 0.50 | 23.50 | 11.0 |
| M10 (1.0-3.5mm) | 12.90 | 14.20 | 0.80 | 26.50 | 13.0 |
If measurements are critical, please ask for them to be checked. Dimensions last updated 09/21.
Code: NSNAM..
NYLON/ALI
| Size Int. Thread (Grip Range) | Cage Length (L) (+/-0.2) | Head Thickness (t) (±0.1) | Body Dia. D (+0/-0.15) | Hole Size X (+0.15/-0) |
|---|---|---|---|---|
| M4 (2.1-2.4mm) | 12.7 | 0.75 | 10.30 | 10.35 |
| M5 (2.1-2.4mm) | 12.7 | 0.75 | 10.30 | 10.35 |
| M6 (2.5-3.2mm) | 15.90 | 0.75 | 12.65 | 12.70 |
| M8 (3.3-4.0mm) | 19.00 | 0.75 | 14.25 | 14.30 |
If measurements are critical, please ask for them to be checked. Dimensions last updated 09/21.
Anzor's 2025 Holiday Opening Hours
Lindapter Girder Clamps: Safe and Secure Connections
Lindapter Hollo-Bolt™: Safe and Secure Connections
To receive useful info and product updates add your details below
Request a copy of our Engineering & Marine, or Construction Wall Chart.
Click here to download a PDF of our Engineering Catalogue. This catalogue includes stainless fasteners and fittings, marine hardware and construction brackets.
Click here to download a PDF of our Construction Catalogue. This catalogue includes stainless/galvanized fasteners and fittings, and construction brackets.
