2-1/2 BSP 316 3 Piece Ball Valve W/Actuator Seat/Iso Mount

VBL60633PM

Out of Stock

2-1/2 BSP 316 3 Piece Ball Valve W/Actuator Seat/Iso Mount

VBL60633PM

Out of Stock

Stainless Steel BSP Ball Valves are used in applications that don't require the use of sanitary grade fittings. They are also normally used in pipe applications, not tube, BSP fittings are often referred to as WOG fittings (water, oil, gas fittings).

Advantages

Self Designed in Accordance with ANSI B16.34 Standard
Thread Ends Conform to ANSI B1.20.1 (Old Norm ANSI B 2.1), BS EN10226-1:2004 (Old Norm BS21:1973), DIN EN10226(Old Norm DIN259/2999), ISO228 investment Casting Body and Cap
Heat Treatment 1080℃/2h AT QW / Solution Annealing, Quenched in Water
Pressure Rating:1000psi (69 Bar) W.O.G. (Water/Oil/Gas)
Test According to EN 12266-1:2012
PED Annex I, Section 4,7
Working Temperature: -20℃-120℃
Blow-out Proof Stem/Full Port
Material: EN 10213-4 1.4408
ASTM A351 CF8M(316) and CF8(304)
Optional: Anti-Seize Lubricant

Downloads

Test Data Sheet

2-1/2 BSP 316 3 Piece Ball Valve W/Actuator Seat/Iso Mount

VBL60633PM

Out of Stock

2-1/2 BSP 316 3 Piece Ball Valve W/Actuator Seat/Iso Mount

VBL60633PM

Out of Stock

Advantages

Self Designed in Accordance with ANSI B16.34 Standard
Thread Ends Conform to ANSI B1.20.1 (Old Norm ANSI B 2.1), BS EN10226-1:2004 (Old Norm BS21:1973), DIN EN10226(Old Norm DIN259/2999), ISO228 investment Casting Body and Cap
Heat Treatment 1080℃/2h AT QW / Solution Annealing, Quenched in Water
Pressure Rating:1000psi (69 Bar) W.O.G. (Water/Oil/Gas)
Test According to EN 12266-1:2012
PED Annex I, Section 4,7
Working Temperature: -20℃-120℃
Blow-out Proof Stem/Full Port
Material: EN 10213-4 1.4408
ASTM A351 CF8M(316) and CF8(304)
Optional: Anti-Seize Lubricant

Downloads

Test Data Sheet