Build faster and stronger decks with S2 Decking Screws.

Last Updated: 8/10/26 at 12:03pm

Xtyyh 07m00orzma Freecoolerbagspromodigitalcomms Blogbanner

Build faster and stronger with S2 Decking Screws.

Self-drilling for quick, clean installation
Discreet fixing thanks to the small head size, low-profile design and colour options
316 stainless steel makes them better suited to high-acid timbers and NZ’s high-salt environment than 304 alternatives
German-designed and manufactured for quality and reliability
Available in three different finishes A) stainless, B) silicone bronze vintage, and C) black coated.

Screw Length (mm)	Max. Fixture Thickness (Hardwood Joist)	Max. Fixture Thickness (Softwood/LVL Joist)
60	33	23
70	43	33
80	53	43

NB: Stainless steel fasteners embedded in high-tannin timbers such as Garapa may cause localised tannin staining on the timber surface.
This risk is reduced by using 316 stainless steel screws (rather than 304) and un-coloured screws (rather than bronze or black stainless steel options).
Bronze finish provides a ‘vintage’ look and may wear off in high-traffic areas, with abrasive cleaning, or if damaged during installation.
Please note that if your screw is spinning, and will not pull into/embed into the decking board, you need to increase the length of the screw.

Fast Delivery: 97% of orders placed before 4:00pm are dispatched on the same day
100% NZ Owned & Operated: Deal directly with our friendly staff across all 12 branches nationwide
Largest Stock & Widest Range: Our local branches are brimming with stock and backed up by our huge NZ distribution centre