Your shopping cart is empty.

Chemical Anchors, Lubricants, Adhesives, Inhibitors

Anzor Fasteners stocks a range of chemical products to complement our range of stainless steel fasteners and can be separated into four broad categories, Lubricants and Corrosion Inhibitors, Chemical Anchors, Adhesives and Sealants and Cleaning and Maintenance.

Lubricants and Corrosion Inhibitors are chemicals or natural products that aid in the prevention of thread galling or cross threading and decay by oxidisation.

Lanolin General Purpose Liquid, non-conductive to 70kV, used as a lubricant for drilling, cutting and machining, excellent rust proofing and great for lubricating locks, hinges and light chain.

Lanolin Heavy Duty Liquid, ideal for use in harsh and highly corrosive environments, lubricates protects and extends the life of high speed and load bearing chains, lubricant for wire ropes, protects battery terminals, boxes and connectors, outside storage protection.

Lanolin Grease, Food grade, non conductive to 70kV, potable water grease, salt spray tested to AS 2331.3.1, rubber grease, nozzle dip and anti-seize for threaded rods, stops galling of stainless and aluminium, stops electrolysis due to dissimilar metals, non perishing to rubber O rings and seals.

Nickel Anti-Seize is copper free. Recommended for stainless steel and other metal fittings. For preventing corrosion, seizing, and galling in harsh, chemical environments, and temperatures to 2400 °F (1315 °C) and is RoHS compliant.

Tef-Gel eliminates seizing galling and friction welding of stainless steel, inconel, and other nickel alloys. Tef-Gel applied to both mating surfaces of nuts and bolts or threaded holes and bolts leaves a layer of 40% solid PTFE within the thread interface, which works as friction barrier. Tef-Gel, which contains 0% volatile solvents, will not evaporate, cold flow, or dry out, giving protection many years later when hardware must be dissembled.

Adhesives and Sealants are available and Loctite offer a range of adhesives, sealants and thread locker compounds like Loctite 243 and 277 thread locker compounds which offer high performance on various metals even without use of an activator, temperature resistant to 180ºC, superior heat ageing resistance, robust curing performance on fasteners with oil contamination traces and tolerant to industrial oils.

Loctite 401 and 406 Instant Adhesive - universal, low viscosity, very fast fixture speed at 3 - 10 seconds, particularly suited for bonding a wide variety of materials, is colourless and suitable service temperature range is -40 °C to +120 °C. Loctite 567 Thread Sealant withstands temperatures to 400 °F with excellent solvent resistance. Locks and seals tapered pipe threads and fittings, including high pressure applications. Disassembles with hand tools and is RoHS compliant.

Fischer Chemical Anchors is a styrene-free polyester resin for fixings in masonry building materials. Resin and hardener are stored in two separate chambers and are not mixed and activated until pushed through the static mixer. Partially-used cartridges can easily be reused by changing the static mixer. FIS P 300 with longer curing time and lower application pressure can be extruded by using a conventional application gun.


Learn Something New

To receive useful info and product updates add your details below

Anzor Wallchart

Wall Chart

Request a copy of our Engineering & Marine, or Construction Wall Chart.

Anzor Catalogues

Standard Catalogues

Click here to download a PDF of our Engineering Catalogue. This catalogue includes stainless fasteners and fittings, marine hardware and construction brackets.

Anzor Catalogues

Construction Catalogues

Click here dot download a PDF of our Construction Catalogue. This catalogue includes stainless/galvanized fasteners and fittings, and construction brackets.

You are subscribed to push notifications but they are not enabled in your browser.
Please either enable push notifications here or unsubscribe here.