• Suitable for push through applications
• Specialised Heat-Treatment Process creates tip hardness to facilitate cutting while the anchor body remains ductile.
• With high ductility it can be bent to a right angle (90 degrees) and remain intact without snapping or breakage.
• Hex-Washer Head increases bearing surface and requires no separate washer, unless required by specification and provides a clean installed appearance.
• No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits.
• Testing shows the installs in concrete with 50% less torque than competitor anchors
• Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved.
• Vibration and Shock Resistance
• Excellent minimum edge distance performance
• Qualified for static and seismic loading conditions
• Available in a wide range of diameters and lengths

Applications

• Electrical Boxes
• Light Fixtures
• Window Frames
• Timber Strapping
• Pipe and cable clips

Approval

• Complies with AS5216
• ETA-12/0060 (Option 1)
• Code listed under IBC/IRC in accordance with ICC-ES AC193 and ACI 355.2 for cracked and uncracked concrete per ICC-ES ESR-2713
• Code listed under IBC/IRC in accordance with ICCES AC106 for masonry per ICC-ES ESR-1056
• BRANZ Appraisal 983 (2018) for applications related to bottom plate fixings and holdown applications per NZS 3604

Technical Data Sheet

BRANZ Test Report

Branz Structures Test Report