• The direct installation through the fixture reduces preliminary work wherever there are several fixing points for each fixture, and guarantees a significantly simpler installation process.
• The design of the push-through anchor sleeve FIS H K allows for a range of usable lengths with just one product, thus providing maximum flexibility and cost-effectiveness.
• The movable edge, in combination with the scale, makes it easier to adapt the anchor sleeve to suit the desired usable length.
• The grating structure of the push-through anchor sleeve is adapted for the injection mortars FIS V Plus, FIS VL or FIS V Zero and ensures sparing mortar use with the best interlock.

Applications

• Timber constructions
• Awnings
• Canopies
• Car ports
• Gates

Building materials

• Vertically perforated brick
• Hollow blocks made from lightweight concrete
• Hollow blocks made from concrete
• Perforated sand-lime brick
• Solid sand-lime brick
• Solid brick
• Hollow pumice slabs
• Slabs made of hollow brick and other perforated brick
• Solid pumice and other solid building materials

Approval

• ETA-15/0263
• ETA-10/0383
• ETA-14/0471
• ETA-20/0729
• DoP No. 0195
• DoP No. 0189
• DoP No. 0273
• DoP No. 0381

Functionality

• The system can be used with any of the following injection mortars: FIS V Plus, FIS VW Plus High Speed, FIS VS Plus Low Speed, FIS VL or FIS P Plus. FIS P can be used but does not have approvals.
• The system is suitable for pre-positioned installation when combined with injection anchor sleeves and threaded rods FIS A or internal threaded anchors FIS E.
• The anchor sleeve is placed in the drill hole, and filled with injection mortar from the anchor sleeve base.
• Turning in the anchor causes the mortar to be pushed through the anchor sleeve's grating structure, so that it fits the base material perfectly. The load is borne by the interlock.

ETA-15/0263 - European Technical Assessment fischer Injection system FIS VL for use in masonry - Injection system for use in masonry

DoP No. 0195 - Declaration of Performance for fischer injection mortar FIS VL (Metal injection anchor for use in masonry)

ETA-10/0383 - European Technical Assessment for fischer Injection system FIS V for use in masonry - Metal injection anchors for use in masonry

DoP No. 0189 - Declaration of Performance for fischer injection system FIS V (Metal injection anchors for use in masonry)

ETA-14/0471 - European Technical Assessment fischer Injection system FIS GREEN for masonry - Injection system for use in masonry

DoP No. 0273 - Declaration of Performance for fischer Injection system FIS GREEN (Metal injection anchors for use in masonry)

ETA-20/0729 - European Technical Assessment for injection System fischer FIS V Plus for masonry - Metal injection anchors for use in masonry

DoP No. 0381 - Declaration of Performance for fischer injection system FIS V Plus (Metal injection anchors for use in masonry)