|
M20 Type AAF Lindapter Adjustable Girder Clamp HDG
LDAAF20
In Stock
|
|
The Type AAF girder clamp is used to achieve a fast steelwork fixing connection where high load capacities are present in either tensile, frictional or combined load directions. It features an innovative two-part design that incorporates a rocking washer to allow the clamp to self-adjust to suit a range of flange thicknesses. Manufactured from low temperature SG iron with a hot dip galvanised finish to provide high performance and anti-corrosion protection in cold environments down to -60°C
NEW Independently fire tested in accordance with ISO 834 for a duration of 120 minutes.
European Technical Assessment - ETA 20/0918
Packing Pieces
Packing pieces are available to increase the clamping range.
Location & End Plates
These plates ensure the clamps and bolts are located in the correct position relative to the supporting steelwork. Location plates are simple fabricated items designed to sit between the two sections to be clamped together to ensure the bolts are fixed at the correct centres. End plates are simple fabricated items that are pre-welded to support frames, bracket or sections, allowing connection to the supporting structure with standard Lindapter clamps.
Build safe and secure steel connection with Lindapter’s Girder Clamp Configurator, click here to visit Lindapter.
Durability and corrosion protection:
| Corrosivity Class | Galvanised Steel |
|---|---|
| C1 | More than 50 years |
| C2 | More than 50 years |
| C3 | More than 20 years |
|
M20 Type AAF Lindapter Adjustable Girder Clamp HDG
LDAAF20
In Stock
|
|
The Type AAF girder clamp is used to achieve a fast steelwork fixing connection where high load capacities are present in either tensile, frictional or combined load directions. It features an innovative two-part design that incorporates a rocking washer to allow the clamp to self-adjust to suit a range of flange thicknesses. Manufactured from low temperature SG iron with a hot dip galvanised finish to provide high performance and anti-corrosion protection in cold environments down to -60°C
NEW Independently fire tested in accordance with ISO 834 for a duration of 120 minutes.
European Technical Assessment - ETA 20/0918
Packing Pieces
Packing pieces are available to increase the clamping range.
Location & End Plates
These plates ensure the clamps and bolts are located in the correct position relative to the supporting steelwork. Location plates are simple fabricated items designed to sit between the two sections to be clamped together to ensure the bolts are fixed at the correct centres. End plates are simple fabricated items that are pre-welded to support frames, bracket or sections, allowing connection to the supporting structure with standard Lindapter clamps.
Build safe and secure steel connection with Lindapter’s Girder Clamp Configurator, click here to visit Lindapter.
Durability and corrosion protection:
| Corrosivity Class | Galvanised Steel |
|---|---|
| C1 | More than 50 years |
| C2 | More than 50 years |
| C3 | More than 20 years |
Anzor's 2025 Holiday Opening Hours
Lindapter Girder Clamps: Safe and Secure Connections
Lindapter Hollo-Bolt™: Safe and Secure Connections
To receive useful info and product updates add your details below
Request a copy of our Engineering & Marine, or Construction Wall Chart.
Click here to download a PDF of our Engineering Catalogue. This catalogue includes stainless fasteners and fittings, marine hardware and construction brackets.
Click here to download a PDF of our Construction Catalogue. This catalogue includes stainless/galvanized fasteners and fittings, and construction brackets.
