|
M12 Type LR Lindapter Clip & Saddle HDG
LDLR12HDG
In Stock
|
|
The Type LR girder clamp is used to achieve a fast steelwork fixing connection between two steel beams or other steel sections where moderate load capacities are present. It consists of two parts, the clip and the saddle, which allow the clamp to self-adjust to suit flange thicknesses between 3mm and 24mm. Suitable for use on parallel and tapered flanges up to 15°. Manufactured from malleable iron and available with a hot dip galvanised or zinc plated finish to provide high performance and anti-corrosion protection.
Packing Pieces
Packing pieces are available to increase the clamping range. Download datasheet for further information.
Location & End Plates
These plates ensure the clamps and bolts are located in the correct position relative to the supporting steelwork. Location plates are simple fabricated items designed to sit between the two sections to be clamped together to ensure the bolts are fixed at the correct centres. End plates are simple fabricated items that are pre-welded to support frames, bracket or sections, allowing connection to the supporting structure with standard Lindapter clamps. Download datasheet for further information.
Build safe and secure steel connection with Lindapter’s Girder Clamp Configurator, click here to visit Lindapter.
Durability and corrosion protection:
| Corrosivity Class | Galvanised Steel | Electroplated Steel |
|---|---|---|
| C1 | More than 50 years | More than 20 years |
| C2 | More than 50 years | More than 5 years |
| C3 | More than 20 years | Not Suitable |
|
M12 Type LR Lindapter Clip & Saddle HDG
LDLR12HDG
In Stock
|
|
The Type LR girder clamp is used to achieve a fast steelwork fixing connection between two steel beams or other steel sections where moderate load capacities are present. It consists of two parts, the clip and the saddle, which allow the clamp to self-adjust to suit flange thicknesses between 3mm and 24mm. Suitable for use on parallel and tapered flanges up to 15°. Manufactured from malleable iron and available with a hot dip galvanised or zinc plated finish to provide high performance and anti-corrosion protection.
Packing Pieces
Packing pieces are available to increase the clamping range. Download datasheet for further information.
Location & End Plates
These plates ensure the clamps and bolts are located in the correct position relative to the supporting steelwork. Location plates are simple fabricated items designed to sit between the two sections to be clamped together to ensure the bolts are fixed at the correct centres. End plates are simple fabricated items that are pre-welded to support frames, bracket or sections, allowing connection to the supporting structure with standard Lindapter clamps. Download datasheet for further information.
Build safe and secure steel connection with Lindapter’s Girder Clamp Configurator, click here to visit Lindapter.
Durability and corrosion protection:
| Corrosivity Class | Galvanised Steel | Electroplated Steel |
|---|---|---|
| C1 | More than 50 years | More than 20 years |
| C2 | More than 50 years | More than 5 years |
| C3 | More than 20 years | Not Suitable |
Anzor's 2025 Holiday Opening Hours
Lindapter Girder Clamps: Safe and Secure Connections
Lindapter Hollo-Bolt™: Safe and Secure Connections
To receive useful info and product updates add your details below
Request a copy of our Engineering & Marine, or Construction Wall Chart.
Click here to download a PDF of our Engineering Catalogue. This catalogue includes stainless fasteners and fittings, marine hardware and construction brackets.
Click here to download a PDF of our Construction Catalogue. This catalogue includes stainless/galvanized fasteners and fittings, and construction brackets.
