FIS V PLUS 300T Injection Mortar

Building materials

Approved for anchorings in:

• Concrete C20/25 to C50/60, cracked and non-cracked
• Hollow blocks made from lightweight concrete
• Hollow blocks made from concrete
• Vertically perforated brick
• Perforated sand-lime brick
• Solid sand-lime brick
• Aerated concrete
• Solid brick

Approved for:

• Rebar connections
• Remedial wall tie VBS 8
• Weather facing reconstruction system FWS II
• Stand-off installation TherMax

You can find detailed information on building materials in the registration document.

Approvals

• ETA-20/0603
• ETA-20/0728
• ETA-20/0729
• DoP No. 0231
• DoP No. 0331
• DoP No. 0354
• ESR-2786
• 20046/15515
• 22044-enshort
• EPD­DBC­FIW­20220088­IBE2­EN

Functionality

• FIS V Plus is a 2-component injection mortar based on a vinyl ester hybrid concept.
• Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
• The mortar is extruded bubble free from the drill hole base.
• The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole.
• The injection cartridges are quick and easy to use with the fischer dispensers.
• Partially used cartridges can be reused by changing the static mixer.
• Visit fischer for Technical Data and Assembly Instructions.

Downloads

ETA - Concrete

ETA - Rebar

Load Table

Safety Data Sheet

View the FIS V PLUS 300T Product Page or other fischer products