• FBN II Bolt Anchors have ETA (European technical assessment) that meets the NZBC requirements (NZS 3101 concrete structures standard)
• 316 Stainless Steel or Higher
• For external use with 50 Year Design Life when used as described in ETA
• Meets BPIR regulation
• The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
• Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
• The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.

Applications

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades

Building materials

Approved for:

• Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

• Concrete C12/15
• Natural stone with dense structure

You can find detailed information on building materials in the approval document.

Approval

• ETA-07/0211
• ETA-18/0101
• DoP No. 0098
• DoP No. 0268
• DoP No. 0192

Functionality

• The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions.
• Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
• When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
• The head embossing offers a simple control of the anchoring.
• In the case of series installation, we recommend using the FABS bolt anchor setting tool.
• Visit fischer for Technical Data and Assembly Instructions.

ETA - Concrete

Load Table

Technical Data Sheet

Declaration of Performance (Mechanical Anchor for use in concrete)

Fischer Free Design Software